This method works best on newer stains, so you may not see much change if your water rings have been present for more than a few days. The idea behind this DIY method is that the heat from the iron causes the moisture in the water spot to evaporate.
You’ll need:
- An iron with the water removed from the inside
- A clean, dry cotton towel or t-shirt
- A microfiber cloth
Step-by-Step Instructions
-
1Step 1Wipe with a dry cloth
Wipe the surface with your microfiber cloth to remove any residue or crumbs.
-
2Step 2Heat up iron
Set the iron to warm and let it heat up.
-
3Step 3Lay cloth over the stained area
Lay your towel or t-shirt over the stained area.
-
4Step 4Iron through the fabric
Iron the stain through the fabric for about five seconds.
Remove the heat for about 30 seconds and check to see if you’ve made any progress.
Repeat as necessary.
